Tag Archives: a/v

What Extron can do for you

Why matrix switchers are awesome… after the trouble of setting them up

In this post we’ll take a look at the two Extron matrix switches I purchase this year, the Crosspoint 450 Plus Series and Extron SMX Series Switcher, and why you may or may not want to add one to your setup.

Let’s say you’re like me and you have quite a few game systems you’d like to have all connected to your TV (or some other display device). The simplest option, but perhaps bothersome depending on your setup, is to swap out the A/V cables as needed.

Your NES is plugged in but you want to play SNES? Disconnect the NES and plug in the SNES. Want to now play your PlayStation 1? Same thing—disconnect the SNES and plug in the PS1.

If you only have a small selection of consoles, this might not be so much of a hassle. But if you have your display wall-mounted or in some other location where you can’t easily get to the inputs, you may find this challenging.

If you’re only working with composite video with RCA plugs (typically with yellow, white and red plugs), a basic RCA selector could work. Plug everything into that, and then that plugs into your display. Almost all of these are going to require you to get up and physically push a button the switch, but that’s not terrible.

My setup is a bit overkill. Click the picture for the full-size version.

But let’s say you have a lot of consoles. Five? Eight? Ten? Twelve? More??? You’re going to need to connect several switchers to each other, and that can get a little confusing.

What if you’re using a higher quality video signal, such as S-video, component or RGB? HDMI? How about a mix of any of those cables? Are you splitting the video to two or more displays at once? You’ll be hard-pressed to find a consumer option that fits your needs.

Enter the Extron line of video switchers.

Continue reading What Extron can do for you